QUINTOLUBRIC® 888 46 does not contain water, mineral oil, or phosphate ester, and is based on high-quality, synthetic, organic esters and carefully selected additives to achieve excellent hydraulic fluid performance.
This product offers the lubrication level of premium, anti-wear hydraulic oils, and can be used with hydraulic components from all major manufacturers.
Applications
QUINTOLUBRIC® 888 46 was designed to replace anti-wear, mineral oil-based hydraulic fluids used in applications where fire hazards exist. QUINTOLUBRIC® 888 46 can also be used in environmentally sensitive hydraulic applications without compromising the overall hydraulic system operations.
Properties
| PROPERTY | TYPICAL VALUE | UNIT |
|---|---|---|
| Appearance/Color | Yellow to amber fluid | [-] |
| Kinematic Viscosity (ASTM D445) At 0°C At 20°C At 40°C At 100°C |
320 109 47.5 9.5 |
mm²/s or cSt |
| Viscosity Index (ASTM D2270) | 190 | |
| Density at 15°C (ASTM D1298) | 0.92 | g/cm³ |
| Acid number (ASTM D974) | 2.0 | mg KOH/g |
| Pour point (ASTM D97) | < -30 (< -22) | °C (°F) |
| Foam Test at 25°C (ASTM D892) Sequence 1 |
50-0 | ml-ml |
| Corrosion Protection ISO 4404-2 ASTM D665A/D130 |
Pass Pass/1a |
|
| Dry TOST (ASTM D943 mod.) | 800 | hrs |
| Flash Point (ASTM D92) | 300 | °C (°F) |
| Fire Point (ASTM D92) | 360 | °C (°F) |
| Air Release (ASTM D3427) | 7 | min. |
| Vane Pump Test (ASTM D2882) | < 5 | mg wear |
| Gear Lubrication (DIN 51354-2) | > 12 | FZG load stage |
| Water Separability (ASTM D1401) | 41-39-0 (30) | ml-ml-ml (min.) |
Key Benefits
- Factory Mutual Approved
- High ignition temperature and low heat release
- Provides excellent shear stability
- Reduced environmental impact
- Reduced waste treatment
- Tested as non-skin or eye irritant, varnish free operation
- Low total cost of operation
- Endorsed by major OEMs
- Outstanding seal compatibility
